Compounds, foam pads and wool pads, configured against haze, holograms and sanding scratches.
High cutting power clears P1500 and finer sanding marks quickly. One pass finishes light colours; on dark paint it serves as the first stage, removing sanding marks fast.
High gloss. Polishes soft paint systems (Nippon, Kansai) and plastic components in one step, or follows 3983 as a second-stage finishing polish.
Cutting power and gloss in one. P2500 and finer sanding marks are removed and polished out in a single step, with no haze or buffing marks on dark paint.
High cut with maintained control. For moderate defects, holograms and paint imperfections, with limited heat build.
Applied after cutting. Removes polishing haze and light holograms and restores surface clarity.
Firm structure for heavily weathered or damaged coatings. Levels sanding marks efficiently, suited to repair grade work.
For applying sealants and waxes. The soft face spreads material evenly with light mechanical action, leaving a mirror finish.
Balanced between cut and finish. For light to moderate holograms and haze, with good heat dissipation and low risk of over polishing.
Fine cell structure for final clarity. The difference is evident on dark finishes, which remain even under light.
For correcting light holograms and faint haze. The soft face protects the film and raises gloss without introducing new cut marks.
Compressed wool felt with stable performance and long service life. For finishing on fine metal, stone and automotive clear coat.
Superfine wool on a foam layer for higher control precision. Small diameters reach details and edges, with a centre hole for alignment.
Twisted wool on both faces, one pad replaces two. Pad change frequency drops markedly in large area polishing.
Composite structure combining compounding, refinement and finishing. Wool cutting layer with microfibre refinement completes the sequence in one pad.
Hybrid structure with controlled cut. Levels clear coat and repaired areas with a controlled removal per pass, avoiding over cutting.
High density short pile with controlled cut and good handling. Results stay even and polishing marks are unlikely.
Merino lambswool with tie cord, reversible. At 22 mm thick the edge stays soft against the paint without scratching.
Consistent fibre structure, smooth handling and good heat dissipation. Polishes under stable pressure with low surface friction.
Balances cutting and finishing. Light sanding scratches, haze and holograms are handled together while preparing the surface for final polish.
Low lint, high density wool that corrects holograms, haze and P1500 to P3000 sanding scratches with a bright finish.
Standard wool pad with stable cut and gloss. Suited to repetitive polishing stations on a production line.
Denim face on a firm base for orange peel and deep defects. The improvement in flatness is visually assessable.
The finishing partner to high gloss compounds. It holds shape at speed without thermal deformation.
Sample requests, spray trial support, product selection and volume pricing. Use the form below. Response within two working days.